FXO/FXS/E1 VoIP Media Gateway

UNIWAY2300 HYBRID GATEWAY & SERVER
FXS/FXO/E1/SBC/AU/RD Hybrid Gateway Plus Server
FXS/FXO/E1/SBC/AU/RD Hybrid Gateway Plus Server
With a simple and economical way to help legacy telephone, fax machine and PBXs interconnect with IP network, the hybrid gateway with Optional Built-in Server enables call center and multi-branch enterprises to process powerful, versatile and efficient VoIP solutions with unparalleled cost advantages.
The UNIWAY2300 hybrid gateway & Server allows for a well-planned, phased migration to an IP network, making the gateways an easy solution for SMB enterprises looking to enhance their legacy PBX equipment with new VoIP access and applications. Connected between a PBX or a LAN, the low density FXO/FXS Gateway converts analog PSTN messages into a format suitable for transmission over standard IP networks.
The UNIWAY2300 hybrid gateway & Server allows for a well-planned, phased migration to an IP network, making the gateways an easy solution for SMB enterprises looking to enhance their legacy PBX equipment with new VoIP access and applications. Connected between a PBX or a LAN, the low density FXO/FXS Gateway converts analog PSTN messages into a format suitable for transmission over standard IP networks.
Technical Specification: |
|||||
Functional Modules (Support 8 Slots max): |
|||||
Digital Boards: |
UMG3000-B1; UMG3000-B2; UMG3000-B4 |
Raido Board: |
UMG1000-D4EM |
||
Audio Board: |
UMG1000-D4AU |
||||
Video Board: |
UMG-VG100 |
||||
Analog Boards: |
UMG1000-D16S; UMG1000-D8S8O; UMG1000-D16O; UMGX1000-D32SP; UMGX1000-D32O |
SBC Board: |
UMG-SBC60 |
||
Magnetic Phone Board: |
UMG-1000-D8MAG |
||||
UMG-CPU03 (2 Slots) |
Intel Core i7-3632QM @2.20GHz, 4 cores, 16GB RAM |
||||
UMG-CPU04 (2 Slots) |
Intel Core i5-3210M @2.50GHz, 2 cores, 8GB RAM |
||||
Network Interface: |
|||||
Main Control board:6 x RJ45 GE ports, 1 x Gigabit SFP port (mutually exclusive with the adjacent RJ45 Gigabit port, only one can be enabled at a time), and 1 x RJ45 100Mbps port (up to 2 main control boards can be installed). |
|||||
Multimedia & Signaling: |
|||||
Voice Processing: |
CODECs:A-law, μ-law, PCM8, PCM16, GSM, G.729A/B, G.722, G.723, iLBC Supports WAV and various file formats Real-time recording/replay, DTMF/FSK transmission Echo cancellation (up to 128ms), AGC/ALS, Answer Machine Detection Full-duplex recording/replay, voice call recording (on-demand/permanent) Conversion of voice channels to conferencing or fax sessions |
||||
Signaling Protocols: |
E1/T1:Supports R1, R2, CAS, SIGTRAN, ISDN PRI Signaling redundancy, link management, call distribution/transfer Multiple signaling point-codes, real-time link management |
||||
VoIP Resources: |
|||||
RTP Protocol: |
Compliance:RTP/RTCP (RFC3551, RFC3552) Echo cancellation, DTMF loading (RFC2833), NAT/Firewall support |
||||
SIP Protocol: |
Standards Supported:IETF RFC 3261, RFC 2327, RFC 3550, RFC 2833 UDP signaling, call holding, Digest Authentication NAT/Firewall tunneling, REFER call forwarding, DTMF transmission in multiple modes |
||||
Conference/Fax Resource: |
|||||
SIP-based Fax T.38 standard; Faxing rate up to 33.6Kbps, ECM support, TIFF files in MH/MR/MMR format |
|||||
Physical Characteristics: |
|||||
Dimensions:2U form factor: 88mm (H) x 440mm (W) x 479mm (L) Net Weight:About 7.5Kg (varies with modules) |
|||||
Power Requirement: |
|||||
AC:90-120V or 200-265V, Frequency: 50-60Hz; DC: 48V DC Power Consumption:< 350W (varies by configuration) |
|||||
Environment Requirement: |
|||||
Operating Temperature:0 - 40℃; Relative Humidity:10% - 85% Installation:Mount on standard 19-inch rack, Avoid dust accumulation, grounded installation |
|||||
Quality and Warranty: |
|||||
Certifications:ISO 9001:2000; Warranty:Functional Module: 3 years; Lifetime Maintenance |