|
-
Intro
-
Specifications
-
Resources
-
More
UMCTTM series Integrated Multimedia Switching Platform
The most cost efficiency and versatile hardware solution for VAS solution
Synway UMCTTM series SSW030A is an open programmable, integrated multimedia switch platform with multimedia processing and signaling capabilities. In addition to rich media resources, the switch platform helps bridge existing wired and wireless networks with IP networks, and integrates for IP (SIP and H.323)/TDM (SS7/ISDN/CAS)/mobility protocols with IVR, fax, conferencing, compression, echo cancellation and other media processing resources. The applications which can be deployed with UMCTTM series SSW030A, include call center, IVR, unified messaging, fax, conferencing, SMS, CRBT, video in enterprise and service provider networks. Each system based on single 2U SSW030A can scale between 240 and 720 TDM voice channels (between 120 and 360 IP voice channels or between 2 and 48 FXO/FXS/Logging channels).
Basic
>A total of four slots, three of whom are optional modules mountable
>Support 1, 2, 3 units of IP media processing & signaling modules(each optional module for 120 channels)
>Support 1, 2, 3 units of media processing & signaling modules(each optional module for 8E1/T1/J1 ports)
>Support 1, 2, 3 units of FXO/FXS/Logging modules(each optional module for 16 FXO/FXS channels)
>Support 1, 2, 3 units of Asterisk-based FXO/FXS modules(each optional module for 32 channels)
Capacity
>Configure for 8~24 E1/T1/J1 ports per chassis (240~720Chs)
>Configure from 2~48 FXO/FXS/Logging channels per chassis
>240~720Chs TDM voice resources per chassis
>120~360 ports IP voice resources per platform
>Support up to 96 64K SS7 signaling links
>Support hot swappable and module-based expansion
>High-performance cooling system
>Telco-grade redundancy
Key features and benefits
Integrate convergence & CTI solutions
Besides conventional voice and data communication, UMCTTM enables VAS provider and enterpriser solution developer to deliver all business modules together, including email, SMS, fax, conferencing, and video.
Rugged, Telco-grade architecture
Embraces all of major PBX specifications: TDM, IP or Asterisk modules support hot swappable, and could be changed or replaced over the front (or) back panel, with no need to open UMCTTM cover.
Flexible configuration for any network
Compliant with diverse (TDM, IP, Asterisk) modules to interface with TDM (FXO, FXS, T1, E1, J1) or IP network, high-Impedance logging modules; support various multimedia processing capability (conferencing, fax, video, compression and SuPerFormTM echo cancellation for voice enhancement) and an array of protocols(SS7, ISDN PRI, CAS, R1, R2, Mobility).
Adjustable capacity for customized needs
2U UMCTTM platform enables 8~24E1/T1/J1 ports, 2~48 FXO/FXS channels, and 120~360 IP channels; Via Synway's channel bank (a special device), all digital T1/E1/J1 lines could be converted to analog channels.
Carrier-grade reliability
Special power system with standby redundancy; advanced cooling system to reassure long-standing robustness; special air cleaner to protect against dust accumulation inside chassis; inside temperature control and alert system; No need to change wiring when changing functional modules as backplane's wiring outlet is separate from backplane's functional-module slots.
Processing capability powered by Intel
Adopt Intel(R) X86, the Mini-ITX industrial embedded platform as host control unit (main board) to execute high-capacity, high-complexity applications.
Perfect and robust engineering design
The motherboard has optional 4.3 inches WVGA(800*480) TFT LCD; UMCTTM series 2U chassis could be mounted on workstation, rack, or wall; Support diverse interfaces(port) on the rear panel , including RJ11, RJ48T, RJ45, RJ45(POE), DB25, USB, etc.
Compliant with your applications and Asterisk
The UMCTTM series are compliant with any applications based on all of Synway® SynCTI driver development kit, and all applications running on Synway's voice boards could be effortlessly migrated to UMCTTM platform; and it also even support any category of Asterisk-based open source software.
Network Interface
-E1 interface: Compliant with G.703, including 75Ω unbalanced interface and 120Ω balanced interface;
-T1/J1 interface: DSX-1 and CSU line compensation available for different extents of signal losses, including 100Ω and 110Ω balanced interfaces;
-Analog interface: Optional functional modules for FXO interface, FXS interface or high-impedance logging;
-24 E1/T1/J1(software configurable);
-1 TCP/IP 100M Ethernet (RJ-45);
-2 USB ports;
-1+1 redundancy connection
Voice Processing
-Support voice call recording (on-demand or permanent);
-All voice channels could be converted to conferencing channels;
-Two voice channels could be converted to a fax session on demand;
-CODECs: support A-law, μ-law, PCM8, PCM16, IAM-ADPCM, VOX, MP3, GSM, G.729A, etc;
-Voice file format: support standard WAV format file and any non-format file;
-Support conversion among various (de)coding formats;
-Support real-time file replay from RAM and server;
-Support real-time recording to RAM and server (Dynamic Storage);
-Support DTMF and FSK transmission/reception;
-Support (standard/self-defined) tone transmission and detection;
-Support R2 transmission and reception;
-Support Barge-in function;
-Support simultaneous recording/replay;
-Compliant with G.168 echo cancellation, with up to 128ms tail length;
-Support AGC/ALS;
-Support Answer Machine Detection;
-Support full-duplex recording and replay;
Signaling Protocols
-E1/T1/J1: support R1, R2, CAS, SS7 and ISDN PRI;
-Signaling interface: CAS supports MFC, R2 and so on;
-Signaling interface: SS7 supports MTP, TUP and ISUP, SCCP, TCAP, MAP;
-Support signaling redundancy, changeover and reset; SS7/ISDN data links could be on any timeslot, not only on timeslot 16;
-Support 96 64Kbps signaling links;
-Support calling distribution among signaling links or among signaling link groups;
-Support call transfer among various signaling points or direct-connectivity mode;
-Support multiple source signaling point-codes as well as projected signaling point-codes;
-Support real-time signaling link’s adding, removing, activating, reset, normal setup, emergency setup, anti-congestion;
-Support multiple signaling points and signaling point transference;
-ISDN supports network terminal and subscriber terminal;
-Support overlapping in reception/transmission of called number;
VoIP Resources
RTP Protocol
-Compliant with RTP/RTCP protocol (RFC3551, RFC3552);
-Coding/Decoding: G.711(A-law/μ-law)/GSM/G.729A;
-Self-adaptive echo cancellation (voice enhancement);
-RTP DTMF loading (RFC2833);
-Support NAT/Firewall monitoring and tunneling;
SIP Protocol
Supported SIP standards:
-IETF RFC 3261 (SIP: Session Initiation Protocol);
-IETF RFC 2327 (SDP–Session Description Protocol);
-IETF RFC 3550 and 3551 (RTP/RTCP);
-IETF RFC 2833 (DTMF);
SIP Protocol Stacks
-Support signaling transmitting over UDP;
-Support call holding;
-Support Digest Authentication;
-Intelligent URL Scheme analysis algorithm;
-Support INVITE/RElNVITE in calling processing;
-Support VIA rPort setting (for NAT/Firewall tunneling);
-Support REFER call forwarding;
-Allow DTMF tone transmission/detection in three modes: inner-band/SIP-INFO/out-of-band (RFC2833);
-Support REGISTER messaging and authentication;
-Inner multiple-threads mechanism;
-Support SIP server;
-Support UDP “pulse-holding” mechanism;
-Support INFO messaging;
Conference/Fax resource
-Support distributed conferencing mode, with conferencing resource in each voice channel;
-Fully support SIP-based Fax T.38 standard;
-Support V29/V27/V17 standards, with faxing rate up to 14.4Kbps (automatically slowing down);
-Support ECM (Fax/Error Correction Mode) for reception/transmission (optional for EXM/non-ECM mode);
-Support TIFF files input in MH/MR/MMR format and transmission/reception in MH, MR format;
Development Environment
Windows OS: Windows2000/XP/2003/Vista/NT;
Linux OS: Including RH7.2/RH9.0/AS4/FC4/SUSE10;
Programming language: ANSI C/C++，Microsoft Visual C++，C#，Delphi;
Security and Certifications
Lighting-proof grade: Level 4;
Certification: FC/CE/China CCC
For RoHS compliance, please contact Synway's sales representatives;
Physical Characteristics
Dimensions: 2U form factor: 265mm (H) x 480mm (W) x 340mm (L)
Weight: about 9Kg (different for the number of optional modules)
Power Requirement
AC: 90-120V or 200~240V (SELECT RIGHT RANGE ON SHELF), Frequency: 50~60Hz;
Power consumption: different for configuration, please refer to user manual;
Environment Requirement
Ventilation: normal;
Operating temperature: 0℃～40℃;
Relative humidity: 10%～85%;
Avoid dust accumulation;
Anti-electrostatic: please grounded;
Installation recommendation: mounted on standard 19-inches rack;
Quality and Warranty
ISO 9001:2000
Optional Module: 3-years
2U Server (including motherboard): 1-year
Modular Architecture & Available Modules:
UMCT series SSW030 consists of server and functional modules, and service providers and enterprise solution providers could select any available servers and a variety of functional modules to configure any custom solutions regarding to capacity, processing capability, network interfaces or applications.
1) Available Motherboard Module 2U server
|
Optional Module |
CPU Type |
|
SCU01 |
ATOM |
|
SCU02 |
Corl Dual Core |
>The 2U server can mount Synway's optional modules, and has space enough for 2 2.5inches SATA hard disk;
>Complementary RCU01 half-length rear panel, 1*standard VGA port, 2*USB ports, 1*Ethernet, 2*3.5mm audio jacks (SPK, MIC);
2) Available FXO/FXS/Logging module (Analog)
|
Optional Module |
Channel |
Echo cancellation |
Fax Channel |
|
SHT-16C-CT /EC(SSW) |
16 channels per module |
32ms |
N/A |
|
SHT-16C-CT/ FAX(SSW) |
16 channels per module |
8ms |
4 |
>All above modules are compatible with all of applications based on Synway SHT series analog boards(no migration effort needed);
>The modules are customized to fit into UMCT series platform (both SSW030A and SSW080A), and support hot swappable;
>The modules could be configured to support FXO lines, FXS lines, or (Microphone) Logging regarding to requirement;
>Complementary RST 16 half-length rear panel with 1*RJ21 interface; 24 ports RJ11 connector and RJ21 cable (3m, 5m, 10m);
>Support Synway SHT series on-board module(B2.0);
3) Available media processing and signaling module (digital)
|
Optional Module |
Channel |
Voice Enhancement |
Fax channel |
|
SHD-240E-CT/PCI(SSW) |
240 per module |
8ms echo tail(G.168) |
N/A |
|
SHD-240E-CT/PCI/EC(SSW) |
240 per module |
64ms echo tail(G.168) |
N/A |
|
SHD-240E-CT/PCI/FAX(SSW) |
240 per module |
8ms echo tail(G.168) |
64 |
>All above modules are compatible with all of applications based on Synway SHT series analog boards(no migration effort needed);
>The modules are customized to fit into UMCT series platform (both SSW030A and SSW080A), and support hot swappable;
>Complementary RST 161 rear panel(8*RJ48C ports); support hot-swappable;
4)Available IP media processing and signaling module
|
Optional Module |
Channel |
Voice Processing |
IP protocol |
|
SHN-120B-CT/PCI+(SSW) |
120 per module |
A-law, μ-law, GSM, G.729A |
SIP/H.323 |
>All above modules are compatible with all of applications based on Synway SHT series analog boards(no migration effort needed);
>The modules are customized to fit into UMCT series platform (both SSW030A and SSW080A), and support hot swappable;
>Complementary RSN021 half-length rear panel(2*RJ45 ports); 2*10M/100M Ethernet; and support hot-swappable;
